![canon ip3000 ink absorber canon ip3000 ink absorber](https://cdn.shopify.com/s/files/1/0255/0992/0834/files/canon-pixma-ip8720-ink-fix-error-6A81-wifi-antenna_480x480.jpg)
Once you plug the power back in, connect the data cable as well and try executing a printing job to see if this cleared the error. The power cord needs to be unplugged for at least 10 minutes in order for the reset to occur automatically. Turn the printer off and disconnect all cables, including data cables. To resolve the issue it is recommended that you reset the printer as specified by the manufacturer.
#Canon ip3000 ink absorber driver#
The reason behind the 6A80 error is most likely a one-time driver software bug or a paper jam around one of the rollers or another moving part of the machine. This will ensure that all software errors are removed from the mainboard and if the rail was cleaned properly, everything should work as intended. If the issue is not resolved, let it rest for at least half an hour before plugging the power cord back in. Once done, it is not necessary to return the cartridge carriage back to its home position once you plug the power back into the printer and turn it back on, it will recalibrate itself. Make sure to get everything out, including the difficult-to-reach bottom parts as the railing needs to be spotless across the entire circumference. Make sure to have some microfiber cloth or paper towels with rubbing alcohol, as this is all you need to get the railing squeaky clean. Then, open the cartridge container and gently move the cartridge carriage to its middle position to inspect the far right part of the guide rail. To resolve the issue you will need to turn off the printer and pull the power cable out of its wall socket. The reason behind the 6A00 error is an obstruction on the cartridge guide, usually caused by a build-up of dust, ink, or paper, causing the cartridge carriage to be unable to return to its home position. Finally, we always recommend using genuine ink cartridges, so make sure to select genuine ones, or at least try purchasing a reputable third-party brand. In case this is not the solution to your problem, clear the ink counter in the Clear Ink Counter dropdown menu, then select Main Black and Set afterward.
#Canon ip3000 ink absorber install#
Use the service tool from Canon to remove the existing driver and install the latest one. If the issue is not resolved, performing a driver reinstallation would be the next step. Repeat the process once more for good measure and try sending another print job to the printer to see if the issue is resolved. Once the printer boots up, while still holding the power button, press the Resume button twice. Then, hold the power button on the printer while plugging the power cord back into your device. As is the case with almost all Canon printers, this is done by unplugging all of the wired connections into the printer, including the data ones. To resolve the issue the first order of business would be to reset the printer properly. The waste ink container is completely absorbed.Using third party and low-quality ink cartridges,.The reason behind the 5B02 error can be one of the following: Once done, place the pads back into their place and plug the power back in, so that the cartridges can return back to their working position. This is the ink absorber that needs to be removed and cleaned, best to use some paper towels. Behind your ink cartridges, there is a set of rollers in clear white as well as a foam pad on either end. Once they do, pull the power cable to fix them in place. To clean the waste ink pad, you need to open the ink cartridge cover and wait for the cartridges to reach their service position. If the issue is not resolved, chances are you can solve it by cleaning the waste ink pad, as this can get stained rather easily. Turn the printer off and on again and try another print job to see if this resolved your case of Canon error 5B00. You will know when this occurs as the printer will light up all of the signal lights. While holding the power button, plug the power cord back into the wall socket and wait until the printer initiates a reset procedure. You need to unplug the power cable and all data cables from the printer, unlatch the cartridge cover and push the Power button. Before anything else, it is recommended to reset the waste ink counter, which is a simple procedure to do.
![canon ip3000 ink absorber canon ip3000 ink absorber](http://www.resetp.com/downloads/jn/image22s.jpg)
In general, the 5B00 error does not represent a major problem for your Canon G2000 printer or any other model, and will not cost a fortune to fix. To resolve the issue there are a couple of things you can do on your own. Interestingly enough, the issue only appears if you try to print, the printer will boot up normally as if nothing was wrong. The reason behind the 5B00 error is either an improper ink cartridge being used or an issue with the waste ink counter.